Follow these easy steps to get your Hotpoint MSZ 902 DF (UK) Refrigerator up and running in no time.

1. Check Appliance Condition

After unpacking the appliance, ensure it is not damaged and that the door closes properly. Report any damage to the dealer within 24 hours of delivery.

2. Choose Installation Location

Install the appliance in a dry and well-ventilated place. Ensure the appliance is not near a heat source and leave space on both sides and above for ventilation.

3. Electrical and Water Connection

Connect the appliance to the power supply and water system as per the installation manual. Ensure the voltage matches your home's specifications.

4. Wait Before Switching On

Wait at least two hours before switching the appliance on to allow the refrigerant circuit to stabilize.

5. Initial Temperature Settings

Once powered, the display will show preset temperatures. The factory-set temperature for the freezer is -18°C and for the refrigerator is +5°C.

6. Ice and Water Dispenser Setup

Upon first use, discard the first ice cubes and water from the dispenser as they may have an unpleasant taste.

7. Final Checks

Ensure the appliance is level and stable, and that the ventilation openings are clear. Avoid using steam cleaners on the appliance.

Back to Home

Hotpoint MSZ 902 DF (UK)

;